Product description. Size: CA-25mm-0.45um. [Case of 500pcs ] CA (Cellulose Acetate) Syringe Filters 25mm Diameter 0.45μm Pore Size Protein Filters by Allpure Biotechnology. FEARURE: CA syringe filter is a natural hydrophilic membrane filter with the balanced pore size structure , as well,which is a low protein binding, ideal water - based sample.
Feature: filter diameter: 25mm, pore size: 0.45um, membrane material: CA(Cellulose Acatate) , hydrophilic property . Lowest protein binding Uniform aperture Hydrophilic property Applicable PH value 4-8 . Syringe filters are made of inert plastic house, membrane, and luer lock fit. It is used with disposal syringes or filtration device with luer
Filtration Part: AF0-1A47-12 Phenex™-GF/NY 25mm Syringe Filters 0.2u, Non-Sterile, Luer/Slip, 100/Pk
Description. Thermo Scientific™ Nalgene™ syringe filters are built to meet your lab’s clarification and sterilization needs. Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications.
Membrane Material: Cellulose Acetate, Nylon, PES, Nitrocellulose, Regenerated Cellulose, PVDF, PTFE and PE, Glass Fiber Membrane Diameter: 25mm and Housing Diameter: 18mm Multifunctional Syringe Filters: equipped with luer-lock or luer-slip male connections for different applications
Membranes for Filtration. Recommended when maximum recovery is important. Durapore™ PVDF Membranes: 0.22μ Pore Size provide high flow rates and throughput, low extractables, broad chemical compatibility and low protein binding. Available in diameters ranging from 13mm to 142mm.
Details. Cellulose Acetate Syringe Filters, Sterlitech, 0.45 Micron, 25mm, 100/Pk. Sterilize biological fluids, serum or media additives. Sample preparations of aqueous solutions. Sample preparation of protein-based HPLC solutions. High throughput, low binding filter units for non-sterile aqueous filtrations. Filtrations of tissue culture media.
Thermo Scientific™ Nalgene™ syringe filters are built to meet your lab’s clarification and sterilization needs. Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications. Whether your research necessitates prefiltration, sample preparation, sterile
Using a custom fabricated cellulose acetate membrane, Ryu et al. created a further type of coculture system where cells on either side of the membrane were in much closer contact through the membrane pores. 74 The porosity of the membrane was shown to be greater than 50%, while the membrane thickness was less than 500 nm for all the pore diameters fabricated (0.1-, 0.4-, and 0.9-µm).
Cellulose Acetate Syringe Filters, 0.45um, 13mm, AQ™ 1,000/CS; Description; Specifications; Filter Housing Diameter: 25mm: Membrane Type: 0.45µm (Hydrophilic
Description. Thermo Scientific™ Nalgene™ syringe filters are built to meet your lab’s clarification and sterilization needs. Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications.
For the polycarbonate track-etch (PCTE) and polyester track-etch (PETE) membrane filters, porosity is the percent of the total surface area occupied by the pores; it typically ranges from <1% to 16%. For the other membrane filters, porosity is the percent of the total volume occupied by the pores; it typically ranges from 40 to 80%.
----- SAMPLE COLLECTION FOR MPA 1.0 Sample Equipment and materials (see Appendix 1 for parts and supplies). 1.1 A MPA Sampling device consists of the following parts (refer to Fig. 1): 1.1.1 Inlet hose with backflow preventor (Watts #8) 1.1.2 Pressure regulator (Watts IR56) plus pressure gauge (Baxter GS 202-2), 0-100 psi 1.1.3 Ten inch cartridge filter housing, preferably Commercial Filter
Description. Lower hold-up volume. Increased operating pressure up to 75 psi. Each filter labeled with specific filter material and pore size for easy identification. Modified acrylic housing to bidirectionally support membrane. Membrane Material: Cellulose Acetate, Polyethersulfone, Polyvinylidene Fluoride. Housing Diameter: 33mm.
Alpha cellulose is the most stable form of cellulose, with the highest degree of polymerization. Cellulose paper made from a high percentage of alpha cellulose, such as Whatman paper, is a sign of high quality and consistency. Qualitative filter paper grades are based on various properties including particle retention, thickness, and weight.
